Mercedes is wining F1 with a new twist on an old technology, power your Raspberry Pi with the sun, and Goat Simulator Tips.
Solar 101: Solar-Powered Pi
12v to 5v (USB Charger)
1. Determine the Draw of your Device(s)
2. Size your Battery
3. Calculate your Solar Panel Needs
4. Choose your Controller
5. Wire it!
The Draw of your Devices:
* If you're building for a house, you can look at your electricity bill for the past 12 months. That gives you a good indication of your total usage as well as your high and low usage months.
* For medium-applications, a Kill-O-Watt works well, but it has a large margin for error, especially when dealing with smaller devices
* If you're building for a small device, check the specs of the device(s) you want to power.
- A spec sheet is a good place to start
- Remember that you must also account for the inefficiency of any charging unit
A Raspberry Pie pulls 700 mA of current at 5 volts at maximum power. (It pulls 300mA at idle)
Watts = Volts * Amps
- West Virginia
That means the RasPi draws 700mA at 5volts, or 3.5 Watt/Hours at maximum load.
** We need to supply the RasPi with 84 Watt/Hours of power per day.
Size your Battery
You need a battery that will support your application.
* Your typically want a battery that can support your device(s) for an acceptable amount of time, assuming that there will be days when your solar panels are completely ineffective.
* For an application like the Raspberry Pi, since it doesn't draw that much, I wanted to design a system that could go 2 days without ANY solar power input.
- Since the daily draw of a RasPi is a maximum of 84 Watt/Hours a day, I need at least 168 Watt/Hours of storage.
* Most small-application solar charge regulators work at 12 or 24 volts. I chose 2 x 12v 8Ah battery that will give me 192 Watt/Hours of storage
Make SURE to get a deep-cycle battery. If you don't you'll quickly find that your batteries don't provide their rated power because of the memory effect. (Most batteries are NOT designed to run all the way down.
Calculate your Solar Panel Needs:
You need to know (1. Draw of your devices) and (2. PEAK Hours in your Location)
Peak Sun Hours is the equivalent number of hours per day when solar irradiance averages 1,000watts per square meter.
- You want to know the amount of sun energy you'll receive per day on the WORST MONTHS of the year.
- Included is a "worst case scenario" solar map based on data from the past 30 years.
* You can use this information to determine how much panel you need.
* In our example. We know that our draw will be 84 Watt/Hours a day
- We need a panel that can generate 84 Watt/Hours a day with MY Peak Hour value
- We also need to keep in mind the charging of the battery. The more power OVER than number, the faster I'll charge a depleted battery.
- I also like to give myself a margin of safety to account for inefficiencies. (I use 20%)
In my location in San Francisco, the worst-case Peak Sun value is 3.6
- That means I can expect MAXIMUM solar exposure for a minimum of 3.6 hours a day
- I have two 90Wh batteries to fill and 84Wh of draw, but only 12.6 Watt/hours of that draw (3.6 hours x 3.5 Watts/hour) will come from the solar panel, the rest will come from the battery.
- I also want to account for the inefficiencies of the system. (I'll add in another 40W/h)
- That means I want a Solar Array that can give me ~240W/H in those 3.6 hours of Peak Sun.
I actually have a 240W/H solar panel… which means I am WAY over supplying the Pi!
Choose your Solar Charger
- You need a unit that will support the total wattage of your Solar Panels AND the total draw of your electronic devices.
Connect with us!
Don't forget to check out our large library of projects on this site. If you want to search for a topic, try this custom search engine
. Also, check out our transcripts
- Google+ Community at gplus.to/twitkh
- Tweet at us at @padresj
- Email us at email@example.com